Customer Service Team
- Total activity 695
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 4
- Subscriptions 345
Articles
Recent activity by Customer Service Team-
How do I reduce a 110W evoUV to 1.5" using single unions?
How to reduce a 110W evoUV to 1.5" using single unions
-
How do I use single unions for solvent weld hosetails on an evoUV?
Learn how to use single unions for solvent weld hosetails on an evoUV.
-
How do I change the ballast box on a 15W/25W evoUV?
For step by step instructions, you can use the manual or you can watch the video tutorial below
-
How long after I install the evoUV will my pond become clear?
There are many factors which affect how long your evoUV will take to clear your pond, such as the levels of nutrients available to the algae, the water temperature and the level of sunlight. Assumi...
-
Which side is the inlet and outlet on my evouv?
The inlet and outlet can be installed either left (Inlet) to right (Outlet) or right (Inlet) to left (Outlet).
-
What is the recommended flow of water for an evoUV 55?
The optimum flow rate of an evo55 is 15,000 litres per hour. The maximum flow rate of an evo55 is 20,000 litres per hour. For all evoUV models, the recommended flow rate is based on what allows you...
-
The air output has dropped on my airpump, why?
The diaphragm may need replacing, we recommended these are replaced annually. View diaphragm kits
-
Where do I place the airpump?
If the pump is situated below the water level, it must have a non-return valve fitted to stop water siphoning back into the pump if there is a power cut.
-
How do I use single unions for pressure pipe on a smaller evoUV?
How to use single unions for pressure pipe on an evoUV
-
How do I setup a 110W evoUV using a Flexi Pipe Kit?
How to setup a 110W evoUV using a Flexi Pipe Kit